Select your location
RE-USABLE | EASY SET-UP
Punctures are no more an issue with Air-Liner, the ultimate insert for mountain bike tires. Air-Liner is a foam-based insert for tubeless tires designed for mountain bike riding. Re-usable and easy to set up, Air-Liner protects the rim, increases the grip and prevents pinch flats. Advantages are countless:
Air-Liner protects the rim thanks to the new-generation polymer is made with, which makes the insert very solid and elastic at the same time.
Air-Liner is available in multiple sizes:
Air-Liner can be used on both standard wheels and tubeless-ready wheels, with both tubeless and tubeless-ready tires, and with any type of sealant – preferably without ammonia. In addition, it fits any type of valve for tubeless.
Although Air-Liner is made with a slighlty dense polymer, it is very resistant. This particular structure provides the insert with light weight without compromising on resistance and duration: Air-Liner weight goes from 160 g to 220 g according to the size, and the product life cycle is 2,000 hours in normal conditions or one hour run-flat.
Air-Liner comes as a tube with two continuous carvings – one at the top and one at the bottom of the tube – designed to make room for the air and sealant within, and to better support the tire. In the packaging, Air-liner comes with a zip tie to close the tube on the rim. As the Air-Liner length always exceeds the wheel diameter, you need to cut the edges of the tube according to the size of the rim (you can use a cutter for this processes). After that, you need to make two holes – one for each extremity of the tube – and insert the zip tie in the two through holes (you can use a screwdriver for making the holes). Beside this, the mounting of the Air-Liner is not too different from the one of inner tubes. To facilitate the mounting even more, we suggest lubricating the insert with some water.